Classic Vintage Cycles The Forum
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Tubulars vs Clinchers
Tubulars or Clinchers, which do you prefer? [4 vote(s)]

Tubulars
50.0%
Clinchers
50.0%


Senior Member

Status: Offline
Posts: 456
Date:
Tubulars vs Clinchers
Permalink Closed


The tire that most of us are familiar with is the clincher which consists of an inner tube and a tire. It won't go into how that works because that's pretty sure everyone understands this. The tubular, or sew up, is glued/ taped directly to a rim that is specifically for tubular tires. The tube is sewn up inside the tire making it a single piece system. You can get to the tube if necessary but it is time consuming and many simply discard it and replace the whole tubular.

 

Note that the wheels and tires for clinchers and tubulars are not interchangeable.

 

Most of the guys who read this have changed a clincher tire. Even if it was on a BMX. Nothing has changed. If you did it then, you can do it now. Some local bike shops often offer flat tire clinics to show tips for a fast change. If you are worried about speed, you can practice over and over and get fast.

 

You can always find a clincher tire where ever you are and have several choices. Not so with tubulars. Most shops only carry a couple choices. In some small towns you might be out of luck all together. Same with tubular replacement rims. There are far more choices for clincher wheels and tires. Tubular wheel/tire combos are lighter, but if you're not climbing huge mountains. Weight should not be your number one concern. 

 

Those who prefer tubulars often note that the tires have lower rolling resistance due to a higher inflation limit. They often have a higher tread count and can wear extremely well and ride better than a standard clincher. Some claim it's faster and easier to change a tubular than a clincher and you get fewer flats because you don't get pinch flats. These could all be great reasons for choosing tubulars.

 

While a tubular might be easier and faster to mount on a rim, there's a couple small problems. First is that the tough part of changing a tubular is getting it off of the rim. Because tubulars might not flat as often, and you might only use the wheel set with the tubulars for racing, there's a good chance that when you do flat, it'll be during a race.

 

Now, cast your vote! Let us know which you prefer!



__________________

Experience Vintage... Love Vintage...



Veteran Member

Status: Offline
Posts: 34
Date:
Permalink Closed

As for me I prefer clincher..I agree with demon tubular rides fast and smooth ..

__________________

Love the look of steel..



Veteran Member

Status: Offline
Posts: 39
Date:
Permalink Closed

Tubulars are $$$, Cement glue messy affair, requires tactics and skills to replace and the drying time is too long of a wait.

However, you trade all of these for speed and lightness... So if you are a pro rider or an L'Eroica rider, you will use them without regrets.

Clinichers were invented after tubulars i suppose? 



__________________


Newbie

Status: Offline
Posts: 1
Date:
Sears Survey
Permalink Closed


Have you visited any of the Sears outlets recently and have your visit receipt or Sears Survey Code? If yes, then this article right here can help you win $500 just for sharing Sears Feedback at the searfeedback.com survey portal.

Well, you seem to be interested now in winning. Just take a look at the article below and get your chances here and now.

 

shop sears feedback com



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us

This is the ONE forum dedicated to classic and vintage bicycles. Our community consists of enthusiasts and collectors of all genre such as lightweight racers, tourers, track racers, time trials, single speeds, gentleman roadsters, commuters, choppers, cruisers, mountain bikes, mtb, bmx and many more. Classic Vintage Cycles - The forum, features topics of all interest like bicycle restoration tips and informations, classified advertisements, vendors corner, bicycle workshop recommendations and galleries. Join our monthly bicycle challenge, winners will be crown bicycle of the month and will be entered into our bicycle hall of fame. Check out our articles evolve around the classic and vintage bicycle scene. Don't miss out our current activities and event calendar. As part of our continuous effort to create awareness for female riders, we have created, the ladies riding club, a sub-forum exclusively for the ladies only.

Copyright© 2013 ClassicVintageCycles.org

All Rights Reserved.